Written by
Jordan Avery Appliance Repair Content SpecialistPublished October 20, 2026
Content status:
Verified
Error codeDI SP / DISP
ApplianceRefrigerator
Quick answer
On a Frigidaire refrigerator with an ice dispenser, DI SP or DISP with a tone signals a stuck cube. Clear it and refit the cleaned bin.
Model compatibility: Frigidaire has used more than one control platform, so DI SP / DISP may mean something different on another appliance or generation. Confirm this against your model documentation and record your full model number before acting.
Plain language
What this code means
Ice jam in the dispenser chute, with an audible tone.
Beeping and DI SP on the display
An alarm that sounds along with DI SP (or DISP) tells you a cube is wedged in the chute. The code is listed for Frigidaire refrigerators that have an ice dispenser.
What Frigidaire says to do
Check the dispenser for jammed ice cubes and clear the jam.
If needed, remove the ice bin and let the contents thaw, then empty it.
Clean the container, wipe it dry and slide it back into place.
When fresh ice is produced, the dispenser should operate as usual.
Refrigerator repair across the Miami, New York, Houston, Los Angeles and San Diego areas
Still jammed after the bin has been cleaned? Frigidaire refrigerator repair covers the Miami, New York, Houston, Los Angeles and San Diego metro areas, and the number is (844) 455-3576. Tell the dispatcher the code, the model and the clearing steps you have done.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Frigidaire appliance?
Book a repair visit for a clear estimate and approval before any work. Share the full model number and the exact code so diagnosis can start with the right path.
When a Frigidaire refrigerator stops working, start with the exact symptom, model number and any displayed code. The goal is to identify the failed system before parts are replace…