Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Frigidaire.
Error Code

Frigidaire Dryer Error Code E94

Content status: Reviewed

Error code E94
Appliance Dryer
Affected model series Standalone electronic dryer
Quick answer

Cycle-configuration checksum error

Model compatibility: Frigidaire has used more than one control platform, so E94 may mean something different on another appliance or generation. Confirm this against your model documentation and record your full model number before acting.

Plain language

What this code means

The control is reporting cycle-configuration checksum error. Buttons, cycle selection, relays, or stored configuration may not behave normally. The code narrows the problem to a system or circuit, but it does not prove that one specific part must be replaced.The display format is not a universal Frigidaire language. Model family and control generation are part of the diagnosis. Verify the model and dryer platform before replacing parts; shared E-codes can differ across Frigidaire generations.

Signs

Symptoms you may notice

  • the code returns after a restart or at the same point in a cycle
  • buttons, cycle selection, relays, or stored configuration may not behave normally
  • the affected function may be disabled while other functions still operate
  • the appliance may enter a protective state to prevent additional damage
Why it happens

Possible causes

  • a temporary control-state error
  • a stuck or contaminated input
  • a loose control-board connector
  • corrupted configuration/memory
  • a failed UI, relay board, or main control
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Power-cycle the appliance once
  • Make sure no key is being held down by an object, moisture, or residue
  • Do not replace a control board based only on the code without confirming the model-specific service sheet
  • If the code returns immediately, professional diagnosis is appropriate

Important safety warning. Stop using the appliance and arrange service if you notice smoke, a burning smell, sparking, repeated breaker trips, exposed wiring, uncontrolled heating, water reaching electrical parts, a gas odor, or any condition that appears unsafe.Safety note: Dryers may use 240 V electrical supply or gas. Internal heater, burner, motor, and control testing should be performed with proper service procedures.

Get help

When to call a technician

A technician should verify the exact Frigidaire model and retrieve the matching service data before testing internal components. Depending on the issue, diagnosis may include wiring continuity, sensor resistance, supply voltage, relay outputs, control-board communication, motor feedback, or configuration checks. Those tests should not be guessed from a generic code list.For persistent E94, professional diagnosis is appropriate after the safe external checks above have been completed.

Seeing this code on your Frigidaire appliance?

Book a repair visit for a clear estimate and approval before any work. Share the full model number and the exact code so diagnosis can start with the right path.

FAQ

Frequently asked questions

References

Sources & references

  • **Frigidaire Dryer 137518700 Technical Data Sheet** — manufacturer tech data sheet mirror https://manuals.plus/m/290619d911ab0ffda1654bcf4c124dcfef6398d6bcb92823695ee344a520bd3d This page paraphrases diagnostic information rather than reproducing service-manual text. Model-specific documentation takes precedence if it conflicts with a general guide.

Ready to get your Frigidaire appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

Call Book a Repair