Skip to content
Specialized Frigidaire repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
(844) 455-3576
Error Code

Frigidaire Range Code F10: Runaway Temperature

Book a Repair (844) 455-3576
Jordan Avery Written by Jordan Avery Appliance Repair Content Specialist Published October 20, 2026

Content status: Verified

Error code F10
Appliance Range
Quick answer

F10 on Frigidaire ovens: a runaway temperature alert, the owner reset and the pizza-oven rack check.

Model compatibility: Frigidaire has used more than one control platform, so F10 may mean something different on another appliance or generation. Confirm this against your model documentation and record your full model number before acting.

Plain language

What this code means

F10 is a thermal runaway safety alert: the oven detects higher-than-normal temperature.

What F10 is telling you

The oven senses higher-than-normal temperatures and raises F10 as a safety alert. Owner support names it Thermal Runaway. It applies to standard range ovens and wall ovens, with a separate note for stone-baked pizza ovens.

Owner checklist

  • Turn off the oven and give it time to cool before the next use.
  • Reset by unplugging for 30 seconds and plugging back in.
  • No access to the plug? Flip the breaker off and on at the fuse box, bearing in mind that this resets everything on the same circuit.
  • Pizza ovens: make sure the rack and Pizza Shield sit in rack position 7 (some models differ, see the Use and Care Guide), reset, then preheat again.

When it persists

Contact support if F10 returns. A technician inspects the RTD sensor probe and, when overheating continues after power returns, the oven control.

Codes to compare

F2 reports oven temperature above specification on older controls, and F30 reports an open probe connection.

Frigidaire range repair coverage

Technicians travel in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Telephone (844) 455-3576 or open Frigidaire range repair.

Source: Troubleshooting Frigidaire Ranges or Ovens with Electronic Oven Controls (EOC), fault code sheet; Frigidaire owner support: Ranges – Error Code Guide; Frigidaire owner support: Oven Error Codes and Alarms Guide

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Frigidaire appliance?

Book a repair visit for a clear estimate and approval before any work. Share the full model number and the exact code so diagnosis can start with the right path.

Book a Repair (844) 455-3576

Ready to get your Frigidaire appliance working again?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 455-3576
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address We operate in Florida, New York, Texas, and California.
Phone (844) 455-3576
Email info@frigidaireservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

Call Book a Repair